The immersion cartridge heating element is made of high-quality corrosion-resistant and high-temperature resistant materials. It can be used in liquid heating and other environments. It has a wide range of applications. It stands out in the same industry with its ultra-high cost performance and...
The immersion cartridge heating element made by Jaye is made of high-quality corrosion-resistant and high-temperature resistant materials. It can be used in liquid heating and other environments. It has a wide range of applications. It stands out in the same industry with its ultra-high cost performance and practicality, and is deeply loved by customers.
Feature of immersion cartridge heating element:
The use of nickel-chromium alloy heating wire and high-purity magnesium oxide rod, high temp resistant seamless thick-walled stainless steel, high-quality heating wire, good elongation, accurate resistivity, high-level quality to effectively prevent corrosion and rust, compression and explosion-proof, durable durable.
Advantage:
1. It has the characteristics of fast heat dissipation, uniform heat dissipation, high pressure resistance, high temp resistance and oxidation resistance, good extension performance, and no electromagnetic.
2. It has high temp resistance, uniform heat conduction and good insulation performance.
3. It has good resistance to chloride corrosion and heat conduction, and high temp oxidation resistance, with uniform heat dissipation and beautiful appearance.
4. Long service life, fast heating, high work efficiency, safety and guarantee.
5. The pipe diameter, power, voltage and other specifications can be professionally customized according to the specific requirements of customers.
Points of Attention
1. The working voltage must be consistent with the rated voltage. Generally, the working voltage cannot exceed 10% of the rated voltage;
2. In order to ensure that the heat generated can be transferred to the heating medium in time and reduce the temperature of the internal material of the cartridge heater, the gap between the outer diameter of the tube and its insertion hole should be reduced as much as possible during embedded heating. The gap between them is less than 0.1mm, such as an electric heating rod with a pipe diameter of 10mm, which should be a hole within 10.1; when exposed to air, the surface temperature must be controlled, otherwise the life will be short;
3. When inserting heating, when processing the mounting hole, the coaxiality and size tolerance should be effectively ensured. If the processing hole is trimmed with a reamer and other tools during processing;
4. The residues left in the processing, such as organic oil, should be cleaned up before installation of the heating rod, which will be carbonized after heating, which will affect the ability of heat transfer.
