he medical mask equipment electric heating tube is mainly used for non-woven mask producing line. It is used in the process of hot pressing. The common specifications of the electric heating tubes for the medical mask equipment are with sheath diameter 10mm and 16mm with a...
the electromechanical heating tube of the mask is used in the hot pressing part of the mask machine equipment. he heating tube of the mask machine refers to the single-headed heating tube with a surface load of 6W / cm2-15W / cm2. The medium-density single-headed heating...
cartridge heating element is customized for the medical disposable mask machine production line. It is a cartridge heating element with a hollow tube. The medical disposable mask machine cartridge heating element is consists of an inner layer, the outer layer of stainless...
The common specification of cartridge heater heating pipe of N95 respirator is: 10 * 240mm. Normally, it can be fixed or not. We can make based on customer’s requirements. General parameters: 220V / 400W, 500W, 600W. The mechanical and electrical Cartridge heating Element...
In order to meet the requirements of the production of the mask machine, the common specification of the electric heating pipe of the 220V / 400W mask machine is: 10 * 240mm. Normally, it can be selected with or without the fixed piece. Conventional parameters: 220V / 400W,...
The quality of the electromechanical heating tube (cartridge heater) of the mask directly affects the hot pressing effect of the mask machine equipment. The quality of the Cartridge heater of the mask directly depends on the components of the electric heating tube, as follows...
Swaged in cartridge heater is made finely. It uses a 450-degree high-temperature-resistant wire directly from the inside of the heating tube. Compared with ordinary single-headed heating tubes, the internal connection of single-headed heating tube ports does not use terminal...
Cartridge heaters can be divided to swaged in cartridge heater and crimped on cartridge heater by the ways of the lead wire. Crimped on and swaged in a cartridge heater can be both used for the mask machine equipment.
