Flat tubular heater made by Jaye Heater is a high-compressed heating rod delivered as a single-, two- or three-wire conductor with single- or two-sided connection. Flat tubular Heating elements are more compact and are less voluminous and provide better heat conductivity. They can be used for heating liquids, gas and solids with specific surface charges that go from 1 to 10 W/cm2. Our flat tubular heaters deliver 30% more surface contact than conventional round elements, giving you faster, more uniform heating for oils, solvents, and process solutions.
Flat tube heating elements (heaters) are particularly popular for catering equipment, as an alternative to the classical tubular element, or for contact cooking. Like KFC, McDonald's, Dicos, pizza stoves and other Western kitchen equipment, They are also employed to heating of the Mold heating, Medical Equipment, Packaging Equipment, Hot Stamping, Sealing, Injection Molding heating.
| Pipe Material | SUS304, SUS316L, Incoloy840, Incoloy800 or customized |
| Resistance Wire | Ni80Cr20, OCR25Al5 |
| Watt Density | 15W/in² to 45W/in² |
| Voltage | 120V-480V or custom made |
| Cross Section | 25.4x6.8mm; 13.5x5.5mm; 15x6mm; 18x6.7mm or customized |
In order to increase the heating transfer efficiency with higher watt density in the limited installing room place and to meet the demand of quality improvement of tubular heater in both the fluids heating and air heating, Jaye industry develop the Flat surface firebar...
The basic structure of the flat tubular heating element that made by Jaye industry is: placing spiral electric heating wires on both sides of the center position of the metal protection tube, and using a specially designed fully automatic non-support powder feeder, which...
In order to increase the heating surface and increase the life time of tubular heater, Jaye industry make the Flat tubular heater for mold heating based the requirement of customers. Flat tubular heaters for mold heating made by Jaye industry are trusted by customers with...
Flat tubular cartridge Heaters are designed as an alternative form of round cartridge heater. It is designed mainly used on the mold heating, and liquid heating, and any applications need to increase the heating area with limiting heating space.
Grill stove flat heating elements are designed increase the heating area to the electric stove heater in order to have a larger contact area, So the Grill Stove flat heating element owns the features of rapid heating speed, high heat transfer efficiency, saving space, power,...
Flat immersion heating elements are designed as an alternative form of round immersion heating element. It is designed to increase the heating area and has a large contact area, So the flat immersion heating elements have the adcantage of rapid heating speed, high heat...
