Immersion Heaters For Water The immersion heaters for water is designed for heating water and other liquids. Generally, it is equipped with a flange head to better fix it on the water container. When heating, the heating part is immersed in water, which can efficiently convert electrical energy...
Immersion Heaters For Water
The immersion heaters for water is designed for heating water and other liquids. Generally, it is equipped with a flange head to better fix it on the water container. When heating, the heating part is immersed in water, which can efficiently convert electrical energy into heat. Because of its low price, easy use, easy installation, and no pollution, it is widely used in various heating occasions. Its service life is very long, which is more than 10,000 hours.
Reference technical parameters:
1. Voltage: 220V, 380V
2. Tube diameter: Φ6—Φ20
3. Material: SUS304 stainless steel, SUS316 stainless steel, SUS310 stainless steel
4. Main power: 3KW—500KW
5. Working pressure: 0.1MPa—3.0MPa
6. Material of flange and thread head: stainless steel, carbon steel, copper.
Precautions for use:
1. The element should be stored out of dryness. If the insulation resistance drops below 1 megohm due to long-term storage, they can be dried in an oven at about 200°C for several hours (or pass the components under low pressure for several hours), or restore the insulation. resistance.
2. When carbon is found on the surface of the tube, it must be removed before use, so as not to reduce the efficiency or even burn out the components.
3. When melting bitumen, paraffin and other solid oils, the voltage should be lowered for use, and then raised to the rated voltage after melting. Prevent the power concentration from reducing the service life of the heater.
Hot Tags: immersion heaters for water, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality
