Thermal Fuse 10A 250V The temperature wire is a safety device to prevent current or excessive temperature. For example, a thermal fuse 10A 250V, when the current exceeds 10A, it will automatically disconnect the circuit to achieve the protection effect. Of course, it can be designed to the...
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of thermal fuse 10a 250v in China, also supports custom service. Welcome to wholesale high quality thermal fuse 10a 250v at competitive price from our factory.
Thermal Fuse 10A 250V
The Thermal fuse is a safety device to prevent current or excessive temperature. For example, a thermal fuse 10A 250V, when the current exceeds 10A, it will automatically disconnect the circuit to achieve the protection effect. Of course, it can be designed to the voltage and current you want, and it can also be made of materials according to requirements: such as metal shells, plastic shells, and oxide film shells. Although the thermal fuse has high reliability in design, the abnormal situation that a single thermal fuse can deal with is limited after all. it provide the most cost-effective "one-shot" or single operation over-temperature protection for all appliances, resistive heating elements, business machines and FHP motors.
The following factors when selection:
1.. The external voltage applied to it.
2.. Abnormal current that requires the fuse to open.
3. The shortest and longest time allowed for abnormal current.
4. The ambient temperature of the fuse.
5. Pulse, impulse current, surge current, starting current and circuit transient value.
6. Are there any special requirements beyond the fuse specification?
7. The size limit of the installation structure.
8. The required certification body.
Installation precautions of thermal fuse:
1. When the used lead is bent, the distance should be more than 6 mm of the root member; when bent, the root cannot be damaged and the lead cannot be forcibly pulled, pushed, or twisted.
2. When the lead welding is completed, the heating temperature conditions should be limited to the minimum. Note that we must not add a high temperature to the thermal fuse; do not force the thermal fuse and lead to be pulled, pressed, or twisted; after the welding work is completed, Cool down immediately for more than 30 seconds.
3. The connecting member should be able to work reliably within the working range of electrical products, and will not be displaced due to vibration or impact.
4. When the product adopts screw, riveting or terminal fixing work mode, it can prevent the occurrence of bad mechanical contact with the society.
Hot Tags: thermal fuse 10a 250v, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, BBQ NTC Temperature Sensor, RY 240 Thermal Fuse, Thermal Cutoff Fuse, Thermal Fuse 10A 250V
