Nozzle Heater With Thermocouple

Nozzle Heater made from Jaye Heater is made of heating wire, mica(insulation), stainless steel(brass)skin and lead wire. The heating temperature can reach 450℃.Sealing brass nozzle heaters in the production process, with a higher pressure, a very good insulation, good heat exchange and other characteristics, the contact area of the heating coil can smooth the best thermal energy transferred to each of the some of the nozzles. The copper per square centimeter of the surface heating coil has a high power density, can be quickly and securely so that the desired temperature.

Usually, Nozzle Heater With Thermocouple is applied in printer, inkjet machine. Thermocouple is installed on such kind of machine,such as injection molding machine, plastic extruder and thermosetting warm sprue injection molding machine. The disadvantage of the thermocouple used in this way is that the object is not directly in contact with the heating, the temperature difference is large and the temperature lag is controlled. At present, the improved heating device, the use of high power density electric heating small element, the thermocouple installed in the electric heating element, its disadvantages are easily solved.

The main technical parameters of Nozzle Heater With Thermocouple:

• Brass Jacket

• Power Standard Density: 4.5W/cm2

• Maximum power density: 7W/cm2

• High temperature cables appear prepared jacket layer can be applied

• Die Electric Strength: 1,500

• Minimum diameter: 25 mm

• Wired socket: Standard 45 degrees (0 degrees or 30 degrees required)

• Standard cable clues: 300mmL, other sizes are available as per your request.

Hot Tags: nozzle heater with thermocouple, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality