Jaye's Flat Tubular Cartridge Heating Element is a spiral electric heating wire into a high-quality stainless steel tube, and in the gap part evenly filled with modified oxidation beauty powder with good thermal conductivity and insulation, shrinkage by shrinkage machine to make the electric...
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of flat tubular cartridge heating element in China, also supports custom service. Welcome to wholesale high quality flat tubular cartridge heating element at competitive price from our factory.
Jaye's Flat Tubular Cartridge Heating Element is a spiral electric heating wire into a high-quality stainless steel tube, and in the gap part evenly filled with modified oxidation beauty powder with good thermal conductivity and insulation, shrinkage by shrinkage machine to make the electric heating wire and air insulation, the center position does not shift and touch the wall of the tube, if fasteners can be welded processing.
The Flat tubular cartridge heating element is used in packaging machines, injection molds, high temperature molds, 3D printers used for heating, with high temperature, short heating time, long service life and low leakage current.
Benefits of Flat tubular cartridge heating element.
1、Small diameter, can do 3-25MM.
2、Length is not limited, can do 20-2000MM.
3, high power, can be (surface area of 60 watts / cm2).
| Housing material | 304,316,310s,Inconel 800,Inconel 600 |
| Resistance wire | Cr20Ni80(BGH) |
| Magnesium oxide rod | MgO99 %(Tateho) |
| Magnesium oxide powder | MgO99 %(Tateho) |
| Diameter | min = 3 mm, max = 40 mm |
| Length | Min = 15 mm, max = 17 m (17000 mm) |
| Voltage | 6V, 12V, 36V, 110V, 120V, 220V, 230V, 380V |
| Power | 10 W ~ 30 KW |
| Max. temperature | 900 degrees Celsius |
Flat tubular cartridge heating element use points to note：
- The working voltage must be in line with the rated voltage, generally the working voltage should not exceed 10% of the rated voltage.
-To ensure that the heat generated by the flat tubular cartridge heating element can be transferred to the heating medium in a timely manner and reduce the temperature of the internal material of the cartridge heater, when embedded heating, should try to reduce the gap between the outer diameter of the heating tube and its insertion aperture, usually the gap between the two is less than 0.1mm, such as the tube diameter 10mm electric heating rod, should be within 10.1 holes; bare air dry burning, must be have surface temperature control, otherwise the life span is short.
-When embedded heating, the installation hole processing should be effective to ensure its coaxiality as well as size tolerance, if the processing is done with tools such as reamer to trim the processing hole.
-The residue left inside the machining should be cleaned before the installation of the heating rod, such as residue of machine oil, etc., which will be carbonized after heating, thus affecting the ability of heat transfer.
Hot Tags: flat tubular cartridge heating element, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, Air Cartridge Heater, Fast Heat Cartridge Heater, Mould Cartridge Heater Element
