The melt-blown heater for the production of masks is made of stainless steel as the heater shell, and is equipped with a amount of stainless steel heating pipes. After the heating pipes are energized, the tubes heat up and heat up, and exchange heat with the air flow sent by the fan, and transfer the heat to the air flow.
The melt-blown heater for the production of masks is made of stainless steel as the outer shell, and is equipped with a amount of stainless steel heating pipes. After the heating pipes are energized, the tubes heat up and heat up, and exchange heat with the air flow sent by the fan, and transfer the heat to the air flow.
This type of heater has the characteristics of fast heating speed, good heat preservation performance and high heating temperature. Not only can be used to heat air, nitrogen and other gases, but also water, oil, solution and other fluids, can be heated to the required temperature in a short time.
It is an Energy-saving Heater:
1. The power of the heater can be determined according to the air volume and temperature rise, to avoid causing excessive power and increasing power consumption.
2. An insulation layer can be added on the surface of the electric heating element to effectively reduce energy consumption by 5% to 10%.
3. It can improve the layout of the melt-blown heater itself, reduce the pressure loss and reduce the energy consumption of the fan.
The Structure of Meltblown Heater as Below:
The materials of melt-blown fabric heaters are: carbon steel, stainless steel SUS304, stainless steel SUS316L, stainless steel 310S, etc. Choose suitable materials according to different heating process requirements. Please let us know your specific demands, our professional engineer can provide you a satisfactory heater.
