Nov 18, 2020
How to use ceramic heating band?
The ceramic heating band has a variety of specifications, customized according to customer needs, including the diameter and height of the electric heating ring, the shape is basically a strip, rolled into a circle, and reinforced with screws. Under normal circumstances, the sockets are ceramic connectors, high temperature wires, screw sockets, plug sockets, etc., just connect the socket.
After assembly, check whether the installation position and specifications are consistent with the heater, whether the voltage used is consistent, and the working voltage does not exceed 10% of the rated value.
The wiring part should be placed outside the heating layer and insulating layer. The shell should be grounded effectively to prevent leakage and electric shock. ensure safety.
The heating element should be placed in a dry place. If the insulation resistance is less than 1 meter due to long-term storage, it should be baked in an oven at about 200 degrees Celsius for 5-6 hours.
The heater is a non-waterproof structure, so when storing and installing, do not touch oil, water and other liquids and media to prevent leakage.
