Why Do Glass Bending Machines Use A Single-Head Heating Tube?

The working environment of the glass bending machine is an embedded dry burning working environment, so this heating method can only be well heated by a single-head heating tube, so what determines the quality of the single-head heating tube?

In industrial production, the single-head heating tube of the 3D glass bending machine belongs to the single-head heating tube with high surface load, so the high surface load of the single-head heating tube directly determines that the choice of the tube material must be made of Ingle 800 material. The internal insulating magnesia powder adopts imported high-temperature magnesia powder to increase its insulation performance. At the same time, the lead is made of nickel stranded wire with ceramic beads, which is resistant to high temperature. Moreover, the wiring method is preferably the inner lead, because the temperature of the outer lead is not high. Surface load is also low.

What are the processing procedures of the single-head heating tube? The processing procedure of the single-head heating tube is as follows: the single-head heating tube refers to a metal tubular single-head heating tube, and then the spring heating wire is put into the metal sheath tube, and the gap is evenly filled with good thermal conductivity and insulation. The modified oxidized beauty powder is shrunk by a shrinking machine to insulate the heating wire from the air, and the center position does not deviate and touches the wall of the tube. After shrinking, annealing, bending, and welding fasteners become.

The electric heating tube heated by the 3D glass bending machine can meet the operating temperature of the 3D glass bending machine, and the heating tube of the 3D glass bending machine can be heated to 950 ° C, and ensure that the temperature of the heated mold is uniform and stable, and the temperature difference is small. The thermal leakage current of the single-head electric heating tube is less than or equal to 1mA, and we know that the single-head electric heating tube has a relatively long service life.

If you want to make the heating tube of the 3D glass bending machine last longer, you can only work on the material:

1. The 3D glass hot bending electromechanical heating tube adopts the heating wire imported from Germany, the insulating and thermally conductive high temperature magnesium oxide powder imported from Germany, and the seamless 800 pipe imported from Japan, with a service life of up to 9600H.

2. Moreover, the lead wires of the 3D glass hot bending electric heating tube are all made of high-quality lead wires: pure nickel high temperature resistant wires imported from Germany.

Click Here To Know More About Single-Head Heating Tube