A mechanical timer for oven is made of elastic steel strip. When in use, the spring is wound manually through the knob to store potential energy. When the spring automatically relaxes, it releases the stored energy and transmits power to the gear transmission mechanism and time control assembly
A mechanical timer for oven is made of elastic steel strip. When in use, the spring is wound manually through the knob to store potential energy. When the spring automatically relaxes, it releases the stored energy and transmits power to the gear transmission mechanism and time control assembly
A mechanical timer for oven has accurate timing, timing, alarm and other functions, simple operation, and can work continuously for a long time
It is applicable to all kinds of electric ovens, ovens, rice cookers, refrigerators, fans, washing machines, rice steamers, disinfection cabinets, pressure cookers, air fryers, microwave ovens, beauty salon instruments, lamps, handicrafts, etc
Household electric ovens are generally equipped with a timer to control the baking time, which is conducive to automatic and accurate control of the baking time of food, so as to prevent food from being burnt due to too long baking time or half cooked due to too short baking time. The timer often fails:
1. Improper assembly of timer. When the timer is assembled, the spindle is not concentric with the panel port, so that the spindle is stuck and cannot be reset. At this time, remove the timer and rotate it to a certain position, observe the movement and sound of the timer, find the stuck part of the rotating spindle, repair and clean it with absolute ethanol to restore the timing function, and then install it again.
2. The timer contacts are stuck. It is necessary for the camera to break off the dynamic and static contacts, polish the two solution points with sandpaper and change the distance between the dynamic and static contacts, so that they can be contacted better and separated stably.
3. The contact metal spring of the timer is weak and the restoring force is weakened. Gently tilt the metal spring with tweezers to improve its restoring force. If it cannot be recovered after tilting, it shall be replaced with a new one.
