Jaye's Heated Silicone Pad is mainly composed of nickel-chromium alloy electric heating wire and glass fiber reinforced silicone rubber insulating cloth pressed together at high temperature. It has the characteristics of fast heating, uniform temperature, high thermal efficiency, high...
Jaye's Heated Silicone Pad is mainly composed of nickel-chromium alloy electric heating wire and glass fiber reinforced silicone rubber insulating cloth pressed together at high temperature. Heated silicone pad has the characteristics of fast heating, uniform temperature, high thermal efficiency, high strength, easy to use, long safety life, not easy to aging, can be bent and deformed on the surface of the object, etc. It can evenly transmit heat to every part in contact with the heated object. According to your needs of voltage, power, specifications size, product shape custom-made production (such as: oval, conical, etc.).
| Technical parameters: |
| 1 ） The highest temperature resistance of insulation material: 300℃ |
| 2 ） Maximum working temperature: 250℃ |
| 3 ） Insulation resistance: ≥ 200 MΩ/DC 1000V |
| 4 ） Voltage strength: ≥ AC1500v/5S |
| 5 ） Power deviation: ±5% |
| 6 ）Max 1.2m×Xm Min 15mm×15mm Thickness 1.5mm (thinnest 0.8mm, thickest 4.5mm) Lead length: standard 130mm, beyond the above size can be specially customized. |
| 7) The back with adhesive backing or called pressure-sensitive adhesive, double-sided adhesive, can make the silicone heaters firmly stick to the surface of the object to be added. Easy to install. |
Instructions for use
1,Using this kind of electric heating device must pay attention to the fact that its continuous use working temperature should be less than 240℃, and the instantaneous does not exceed 300℃.
2,Heated silicone pad electric heating devices can work with the pressed state, that is, with the auxiliary pressure plate to make it close to the heated surface. At this time, the heat conduction is good, and the power density can reach 3W/cm2 when the temperature in the working area does not exceed 240℃.
3,Under the condition of paste installation, the allowable working temperature is less than 150℃.
4, If the air dry burning conditions, by the material temperature limit, the power density should be less than 1 W/cm2; non-continuous conditions, the power density can be 1.4 W/cm2.
5, The working voltage selection to high power - high voltage, low power - low voltage for the principle, special needs can be listed.
Hot Tags: Heated Silicone Pad, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality
