Ceramic Base KSD301 Thermostat

Ceramic Base KSD301 Thermostat

Ceramic Based KSD301 thermostat is a miniature sealed bimetal thermostat with metal cover, which belongs to the thermal relay series.It is a single-pole single-throw structure and works under a resistive load.

product description

Application

Packing & Delivery

Quality

Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of ceramic base ksd301 thermostat in China, also supports custom service. Welcome to wholesale high quality ceramic base ksd301 thermostat at competitive price from our factory.

 

Ceramic Base KSD301 thermostat is a miniature sealed bimetal thermostat with metal cover, which belongs to the thermal relay series. It is a single-pole single-throw structure and works under a resistive load. The main principle is that one of the functions of the bi-metal siscs is Snap action under sensing temperature changes. The fast movement of the disc pushes the action of the contact into the internal structure, and then finally turns on or off the circuit. The main features of the KSD301 thermostats are fixed working temperature, reliable fast action, less flashover, longer working life and less radio interference.


The Advantages of KSD301 thermostat:

Easy mounting.

High precision.

High durability.

Rapid heat transmission.

No breakdown, no flashover.

Every product will be tested, extremely high temperature pass rate.

image001


Parameters of Ceramic Base KSD301 Thermostat:

Use

Temperature control/Overheat protection

Appliance

Coffee maker/ Drinking machine/toaster/Microwave oven/ Heating/ Portable Refrigerator/etc

Reset type

Automatic

Base material

ceramic base

Amperage

5A/10A/16A

Max. Operating Temperature

220°C

Protection class

IP00

Contact material

Silver/Gold

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal type: OFF temperature higher than ON temperature.(Normal close)

K type: ON temperature higher than OFF temperature.(Normal open)

Maximum ambient temperature

280°C(Long period)

310°C (Less than 15 min)

Diameter of

bimetal disc

Φ 12.8mm(1/2″)

Approvals

UL/CQC/TUV

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)


Application of the Ceramic Base KSD301 Thermostat:

This bimetal ceramic based KSD301 thermostat is widely used in various small household appliances such as coffee machines, water dispensers, toasters, microwave ovens, electric pads and portable freezers to provide temperature control or temperature protection (cut off thermostat).


Hot Tags: ceramic base ksd301 thermostat, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, BBQ NTC Temperature Sensor, Snap Disc Thermostat

Application-Thermostat

Packing & Delivery

Quality-Thermostat

Related Products

  • Air Finned Cartridge Heater
  • Immersion Copper Rod Heater Thermostat
  • Flat Mold Heating Cartridge Heater
  • Silicone Heater for Heat Press Machine
  • Injection Molding Ceramic Band Heater
  • Stainless Steel Mica Strip Heater

Category

Product Recommended

  • Silicone Heating Strips in Refrigeration Compressor Systems
  • Adjustable Electric Iron Kst Thermostat
  • Cut Off Fuse
  • High Density Cartridge Heater
  • Silicone Rubber Heater Mat With Adhesive
  • Oven Timer Switch For Cooking Appliance

Share