Washing Machine Heating Element The washing machine heating element is generally W-shaped, and its structure is to put an electric heating wire in a metal tube, and the gap part is tightly filled with crystalline magnesium oxide with good thermal conductivity and insulation. The two ends of the...
Washing Machine Heating Element
The washing machine heating element is generally W-shaped, and its structure is to put an electric heating wire in a metal tube, and the gap part is tightly filled with crystalline magnesium oxide with good thermal conductivity and insulation. The two ends of the heating wire are connected to the power supply through two lead rods. It has the advantages of simple structure, long life, high thermal efficiency, good mechanical strength, and can be bent into various shapes to be safe for use. Using high-quality materials and strict process technology, with excellent electrical insulation performance and extremely high electrical strength is made.
Specifications：
1. Power (W): 1950
2. Working voltage (V): 230
3. Material: Generally SUS304, can be customized
4. Pipe diameter: Φ8.0, Φ10.0, etc.
5. Main use: washing machine
Precautions:
1. The working voltage is not more than 1.1 times of the rated value, and the shell should be effectively grounded.
2. A small amount of paste may overflow from the end of the component. This is a sealing material and does not affect the use. After the power is turned off, wipe the spilled off.
3. The components should be stored in a ventilated room with a relative humidity of no more than 85% and no corrosive gas.
4. After the element has been used for a period of time and has not been used for a long time and is damp, when the cold insulation resistance is less than 1 megohm, the component can be baked in a drying oven at a temperature of about 200 degrees, or the voltage can be directly energized and heated to remove moisture , Until it returns to normal.
