How to install Geyser heating element

How to install the geyser heating element:

一， the main installation method

1. Drilling and positioning plug-in installation;

2. Screws and bolts are limited and fixed;

3. Female tooth ring and female flange butt joint;

4. Hoop, stainless steel hoop, support plate fixing

5. Suspension type;

6. Immersion.

二, the installation method of the heating pipe from the purpose and shape structure:

1. Generally, the heating is inserted directly into the mold, leaving 3-5cm cold end outside the hole for easy plugging and unplugging;

2. U (W) special-shaped heating pipes are generally welded with fasteners or limit stoppers, usually punching holes on the container, adding gaskets to the threads, and tightening them with nuts;

3. The threaded flange type electric heating pipe is punched on the container, directly welding the female tooth ring or welding a piece of external steel pipe and welding the female tooth ring at the end of the steel pipe for butt installation;

4. When it is not possible to install with holes, the terminal should not be in contact with the medium or environmental requirements, and the heating pipe should be suspended by steel wire or other methods;

5. The nozzle is pressed with a waterproof rubber head or the inside of the welded stainless steel pipe is filled with glue and waterproof. The heating pipe of this product can be directly thrown into the liquid medium for heating;

6. The end of the heating tube directly comes out of the terminal or lead without any fasteners, which can be fixed in the form of a hoop or a support plate;

7. The spiral electric heating tube is generally inserted directly into the tube or sleeved outside the tube, and is stuck on the grooved technical component for heating