Material And Fitting For Heating Element

  • Industrial Magnesium Oxide Fused Mgo Powder
    Industrial Magnesium Oxide Fused Mgo Powder

    ​It belongs to moisture-proof and high-temperature-resistant magnesium oxide. It is divided into different grades and specifications according to various electrical performance requirements. It is suitable for the production of different high-temperature air-fired electric...

  • Magnesium Oxide Mgo Powder For Heating Element
    Magnesium Oxide Mgo Powder For Heating Element

    ​Magnesium powder is an important accessory in the manufacture of electric heating elements. It is usually filled with crystalline magnesium oxide powder in the gap of the electric heating tube. The appearance is white or yellowish powder. According to different uses, it is...

  • High Temperature Ceramic Plug Connector
    High Temperature Ceramic Plug Connector

    ​The shell of the high-temperature ceramic plug is made of high-strength aluminum alloy, which can withstand high temperature of 500 degrees and high pressure (220V-600V). We provide high-temperature plugs with internal copper inserts diameter of 5mm and 6mm, and the hole...

  • 2-4 Holes Magnesia Ceramic Insulating Tube For Heating Element
    2-4 Holes Magnesia Ceramic Insulating Tube For Heating Element

    ​Jaye can make different shapes, such as round, square, rectangular and oval. We provide outer diameter from 0.3mm to 50mm for selection. The ceramic rods are widely used in many kinds of electronical devices as ceramic insulators, positioning pins, central pins, guide pin.

  • Magnesium Oxide Rod For Single-end Cartridge Heater
    Magnesium Oxide Rod For Single-end Cartridge Heater

    High-purity magnesium oxide rod is a product specially produced by our company for single-end electric heating tubes according to customer requirements. It has the advantages of insulation performance, voltage resistance and good heat conduction. It has been recognized by...

  • Thermocouple Head With Aluminum Die-casting
    Thermocouple Head With Aluminum Die-casting

    The basic principle of thermocouple temperature measurement is that two different material conductors form a closed loop. When there is a temperature gradient at both ends, a current will flow through the loop. At this time, there is an electromotive force between the two...

  • Stainless Steel Thermocouple Head
    Stainless Steel Thermocouple Head

    ​This is a product that is waterproof thermocouple head. The thread can be precisely welded at the pipe to ensure a waterproof seal. Jaye adopts stainless steel integrated structure, built-in high-quality chip, which make a more accurate measurement. If there are special...

  • Alumina Ceramic Components
    Alumina Ceramic Components

    Alumina ceramics have the characteristic of low dielectric constant, low dielectric loss, high insulation strength, high volume resistivity, good bending strength, high stability, high compressive strength, and good cold and hot shock denaturation. It is widely used in...

  • Steatite Ceramic Insulator With 3 Holes
    Steatite Ceramic Insulator With 3 Holes

    Steatite ceramic parts, white color, strong acid resistance, high insulation, strong adsorption, a good device ceramic material, it is used as coil skeleton, mounting plate, bracket, various types of high-frequency insulators, ceramic switch shaft in electronic products...

  • Slip-on Flanges For Heaters
    Slip-on Flanges For Heaters

    ​The slip-on flat welding flange is connected to the pipe end. It mainly useds for the parts that connect the pipe to the pipe. There are holes on the flange, which can be worn through bolts to make the two flanges tightly connected, and the flanges are sealed with gaskets.

  • Plate Flat Welding Flange
    Plate Flat Welding Flange

    ​Plate flat welded flange is a convenient material, simple manufacturing, low cost, widely used hardware accessories, but the rigidity is poor, so it should not be used in chemical process piping system with flammable, explosive and higher vacuum requirements and extremely...

  • Stainless Steel Terminal Pins For Electric Heater
    Stainless Steel Terminal Pins For Electric Heater

    ​The material of the electric heater wiring terminal pin is usually stainless steel, iron chromium aluminum and nickel chromium. The size of the electric heater wiring terminal pin can be customized according to customer requirements.

Category

Product Recommended

  • Silicone Heating Strips in Refrigeration Compressor Systems
  • Adjustable Electric Iron Kst Thermostat
  • Cut Off Fuse
  • High Density Cartridge Heater
  • Silicone Rubber Heater Mat With Adhesive
  • Oven Timer Switch For Cooking Appliance

Share

Jaye Heater Technology Co., Ltd. is one of the most professional material and fitting for heating element manufacturers and suppliers in China, featured by high quality electric heating components. Please rest assured to wholesale custom made material and fitting for heating element at competitive price from our factory.
Hair Dryer Thermal Fuse