PTC Water Immersion Rod Heater PTC immersion water rod heater refers to the positive temperature coefficient, which is usually called the temperature coefficient. When the temperature exceeds a certain temperature, the resistance increases gradually with the increase of temperature. It uses PTC...
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of ptc water immersion rod heater in China, also supports custom service. Welcome to wholesale high quality ptc water immersion rod heater at competitive price from our factory.
PTC Water Immersion Rod Heater
Jaye custom PTC immersion water rod heaters refer to the positive temperature coefficient, which is usually called the temperature coefficient. When the temperature exceeds a certain temperature, the resistance increases gradually with the increase of temperature. It uses PTC thermal ceramic element as the heat source, the corrugated sheet made of aluminum alloy as the radiator, and the heater is formed by bonding and welding. Jaye evenly distribute high-temperature resistance wires in high-temperature resistant stainless steel seamless tubes, and densely fill the gaps with crystalline magnesium oxide powder with good thermal conductivity and insulation properties. This structure is not only advanced, high thermal efficiency, but also generates uniform heat. When a current flows through the resistance wire, the heat generated is diffused to the surface of the metal tube through the crystalline magnesium oxide powder, and then transferred to the heated part or the air to achieve the purpose of heating.
Use PTC water immersion rob heater to boil water can reach a stable temperature. When the water is boiled dry, the heater will automatically adjust the temperature to prevent damage to the element. PTC heating element has low thermal resistance and high heat transfer efficiency Thermostat is a kind of energy-saving electric heater. Its outstanding feature is that it has a safety function in any application. The electric heating tube heated on the surface does not look red, which will lead to burns and fire or other security risks.
Caution:
1.The PTC heater must be connected properly and direct connection of the wire to the socket is strictly prohibited, otherwise the connection will be shorted and cause a fire.
2. The heating element must be positioned correctly and stably, the effective heating zone must be completely immersed in a liquid or metal solid, and air burning is strictly prohibited. Once the presence of scale or carbon on the component surface is determined, the manufacturer of the PTC heater must use it clean and in a timely manner to avoid the effect of heat loss and reduced service life.
3. When heating molten metal or solid nitrate, alkali, asphalt, paraffin, etc., the working voltage must first be reduced. After melting the medium, the voltage can be increased to the nominal voltage.
Characteristic:
1. Automatic recovery after failure
2. Environmental protection during use.
3. Highly customizable reliability
Advantage：
1. The heating temperature is below 200 degrees Celsius
2. Low production cost
3. The body will not be red under any circumstances and has a protective isolation layer
4. Strong designability, fast production and high degree of mechanization
5. There is no problem of scalding human body and causing fire
6. Easy to design and control the control cabinet
7.Energy saving
When the ambient temperature rises, its own resistance will gradually increase, and the power will gradually decrease, and the power will stop changing after the ambient temperature stabilizes, thus achieving the effect of energy saving.
Hot Tags: ptc water immersion rod heater, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, PTC Heating Element 12V
