3D Printer Silicone Heated Bed 500*500MM The heated bed bed is very important for 3D printing of fixed models. If the temperature of the heated bed bed is not enough or the heating effect is not good, it will cause the model to warp, which will cause the model to easily fall off the plane and...
Jaye Heater Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of 3d printer silicone heated bed 500*500mm in China, also supports custom service. Welcome to wholesale high quality 3d printer silicone heated bed 500*500mm at competitive price from our factory.
3D Printer Silicone Heated Bed 500*500MM
The heated bed bed is very important for 3D printing of fixed models. If the temperature of the heated bed bed is not enough or the heating effect is not good, it will cause the model to warp, which will cause the model to easily fall off the plane and cause displacement or misalignment. The 3D printer silicone heated bed 500*500MM with small volume and uniform heat generation is a very suitable accessory. By heating the heated bed bed, the contact surface of the printed part and the heated bed bed can be maintained at a higher temperature (PLA60℃ABS105℃) to prevent material cooling during the printing process And cause the model to warp.
Specification:
1. Product thickness: 0.8-2.0 mm
2. Applicable power supply: 0-380VDC, VAC
3. Specific gravity: 1.6 g/cm3
4. Power density: 2W/cm2
5. Insulation strength>500 megohms
6. Heat capacity:-1.0J/g.k
7. Continuous use temperature <240℃
8. Hardness: 60±5 shore
9. Adhesive installation temperature <150℃
10. Tensile strength> 180kg/cm2
11. Voltage resistance>2100VDC/min
Hot Tags: 3d printer silicone heated bed 500*500mm, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality, 3D Printer Chamber Heater, Custom Silicone Heating Element, Silicone Baseboard Heaters, Silicone Heat Pad For 3d Printer, Silicone Heating Pad With Thermostat, Silicone Strip Heater
