Finned duct heater is wound with metal fins on the surface of the common element. Compared with the common element, the heat dissipation area is enlarged by 2 to 3 times, that is, the allowable surface power load of the fin element is 3 to 4 times that of the common element. Because the length...
Finned duct heaters made by Jaye is wound with metal fins on the surface of the common element. Compared with the common heating element, the heat dissipation area is enlarged by 2 to 3 times, that is, the allowable surface power load of the fin element is 3 to 4 times that of the common element. Because the length of the element is shortened, the heat loss is reduced. Under the same power condition, the finned duct heaters made by Jaye has the advantages of fast temperature rise, uniform heat generation, good heat dissipation performance, high thermal efficiency, long service life, small heating device, and low cost. Reasonable design according to user requirements, easy to install.Products are widely used in machinery manufacturing, automobiles, textiles, food, home appliances and other industries, especially in the air-conditioner air curtain industry.
Process: Finned duct heater is made of fins wrapped around the outer surface of the tubular heater to dissipate heat.
Application:
1. The heating of chemical materials in the chemical industry, the drying of some powders under a certain pressure, the chemical process and the spray drying are all realized by them.
2. Hydrocarbon heating, including petroleum crude oil, heavy oil, fuel oil, heat transfer oil, lubricating oil, and paraffin.
3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, and other fluids that need to be heated.
4. Because it adopts advanced explosion-proof structure, the equipment can be widely used in chemical, military, petroleum, natural gas, offshore platforms, ships, mining areas and other places that require explosion-proof.
It’s with fins (U-shaped, W-shaped and M-shaped stainless steel electric heating tubes can be customized according to customer requirements for use in electric ovens, drying boxes, bakeries and other empty gas heating places). Pay attention to the fin type The tubular heater must be completely embedded in the object to be heated, and no air-fired finned duct heater is allowed. After using the finned duct heater, if there is dirt or carbon on the surface of the metal hose shell, it should be removed immediately to prevent the heat dissipation characteristics and service life of it from being damaged.
If you have any specific requirements on the finned duct heaters, just feel free to contact Jaye industry.
Hot Tags: finned duct heater, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality
