Sep 30, 2026
A cartridge heater is a cylindrical heating element designed to be inserted into a drilled hole or machined bore.
The internal resistance wire generates heat, which is transferred through the metal sheath to the surrounding component. The component being heated may be an aluminum block, mold, die, metal plate, sealing bar, or machine part.
Cartridge heaters are available in different diameters and lengths. Voltage, wattage, sheath material, lead configuration, and terminal design can also be customized.
Typical applications include:
An immersion heater is designed to heat a liquid or other process medium directly.
The heating element is installed through a tank wall, flange, threaded fitting, or another mounting structure. The heating section is positioned inside the medium, while the electrical connection is normally kept outside the tank.
Depending on the application, immersion heaters can be manufactured with different tube materials, heating lengths, shapes, mounting methods, and electrical configurations.
Typical applications include:
| Feature | Cartridge Heater | Immersion Heater |
|---|---|---|
| Basic structure | Cylindrical heating element | Tubular heating element with a mounting structure |
| Installation | Inserted into a drilled hole or bore | Installed through a tank wall, flange, thread, or fitting |
| Main heating target | Solid components | Liquids or process media |
| Heat transfer | From the heater sheath to the surrounding solid material | From the heater sheath directly to the surrounding medium |
| Typical installation | Heating block, mold, die, plate, machine component | Tank, vessel, reservoir, process equipment |
| Common shapes | Straight cylindrical | U-shaped, straight, multi-element or customized configurations |
| Mounting method | Close-fit installation inside a bore | Flange, threaded fitting, screw plug, bracket or custom mounting |
| Material selection | Mainly based on temperature and surrounding component | Strongly affected by the chemical and physical properties of the medium |
| Temperature control | Sensor or thermostat can be installed in the heated component | Sensor can monitor the temperature of the liquid or process medium |
| Main design considerations | Bore size, diameter, length, wattage and fit | Medium, tank size, heating length, wattage and mounting |
| Typical applications | Molds, dies, heating blocks and machinery | Water tanks, oil tanks, process tanks and liquid heating systems |
The installation method is one of the most important differences between the two heater types.
A cartridge heater requires a suitable hole or bore in the component being heated. The heater is inserted into this opening, allowing heat to transfer from the outer sheath into the surrounding material.
The diameter of the cartridge heater and the size of the installation bore need to be considered together. A suitable fit helps provide consistent heat transfer and proper mechanical installation.
An immersion heater is installed directly on a tank or vessel. Its heating section extends into the liquid, while the terminal section remains outside the medium.
Depending on the equipment design, an immersion heater may use a flange, threaded connection, screw plug, or customized mounting structure.
The heat transfer path is also different.
For a cartridge heater, heat normally travels from the internal resistance wire through the metal sheath and then into the solid component surrounding the heater.
The material and dimensions of the heated block, mold, or plate therefore have an important influence on heat transfer.
For an immersion heater, the heating surface is directly exposed to the process medium. Heat is transferred from the heater surface into the liquid.
The actual heat transfer can be affected by the properties of the liquid, circulation, flow rate, temperature difference, heater surface area, and heater arrangement.
For example, liquid circulation can help distribute heat throughout a tank, while insufficient circulation may result in uneven temperature distribution.
The required wattage should be determined according to the actual heating conditions rather than the heater type alone.
For cartridge heaters, the available bore size and heated length often limit the available heating surface. The required power needs to be considered together with the material being heated, operating temperature, installation dimensions, and heat dissipation.
For immersion heaters, the required power is generally related to the volume and type of medium, target temperature, heating time, heat loss from the tank, and circulation conditions.
Surface load is also an important consideration. Excessive surface load may result in a high heater surface temperature, while insufficient power may increase the required heating time.
Therefore, voltage, wattage, heating length, and surface load should be considered together when designing a custom heater.
Material selection depends on the environment in which the heater operates.
For cartridge heaters, the sheath material is mainly selected according to the operating temperature and the surrounding component. Stainless steel and other suitable alloys can be used depending on the application.
For immersion heaters, material selection is especially important because the heating tube is directly exposed to the process medium.
Water, oil, cleaning solutions, chemicals, and other liquids can have different corrosion characteristics. The heating tube material should therefore be selected according to the actual medium, operating temperature, and service conditions.
Common material options may include stainless steel and nickel-based alloys, depending on the application requirements.
Cartridge heaters are usually straight cylindrical elements because they need to fit into a machined bore.
The diameter and length are normally determined by the available installation space and required heating capacity.
Immersion heaters provide more flexibility in terms of overall geometry. Depending on the tank and installation requirements, the heating tubes can be arranged into U-shaped, straight, multi-loop, or other customized configurations.
The heating length and tube spacing can also be adjusted to distribute the heating area within the tank.
When requesting a cartridge heater, the following information is normally required:
| Parameter | Required Information |
|---|---|
| Diameter | Heater diameter |
| Heated length | Required heating section |
| Overall length | Total heater length |
| Voltage | Rated operating voltage |
| Power | Required wattage |
| Sheath material | Required material if specified |
| Lead wire | Wire type and length |
| Terminal | Terminal or lead configuration |
| Operating temperature | Required working temperature |
| Installation bore | Bore diameter and depth |
| Quantity | Required quantity |
| Drawing | Drawing or installation dimensions if available |
For immersion heaters, additional information about the tank and process medium is normally required.
| Parameter | Required Information |
|---|---|
| Heating medium | Water, oil, chemical solution or other medium |
| Tank size | Tank dimensions or liquid volume |
| Voltage | Rated operating voltage |
| Power | Required wattage |
| Heating temperature | Target operating temperature |
| Heating time | Required heating time if available |
| Tube material | Required material or medium compatibility |
| Heating length | Required immersed heating length |
| Tube diameter | Required tube diameter |
| Mounting | Flange, thread, plug or other connection |
| Terminal position | Required electrical connection location |
| Temperature sensor | Sensor type and position if required |
| Quantity | Required quantity |
| Drawing | Tank or heater drawing if available |
The choice between a cartridge heater and an immersion heater mainly depends on how the heat needs to be transferred.
If the heating target is a solid component with a suitable drilled hole, a cartridge heater can be integrated directly into the component.
If the heating target is a liquid inside a tank or vessel, an immersion heater can be installed directly into the medium.
Other factors should also be considered, including:
Cartridge heaters and immersion heaters are designed around different heating environments.
A cartridge heater is generally integrated into a solid component and transfers heat through its metal sheath into the surrounding material. An immersion heater is installed directly into a liquid or process medium and transfers heat from the heating tube to the medium.
For a custom heating element, the heater design should be developed according to the actual application, including the heating target, installation dimensions, power, operating temperature, material requirements, and mounting method.
Providing a drawing, installation dimensions, or details of the heating medium can help determine the appropriate heater construction.
Previous: How to Choose the Right Mica Band Heater for an Injection Molding Machine?
Next: U-Shaped vs. W-Shaped Finned Tubular Heaters: What Are the Key Differences?
