Cleaning The Inside Of The Heat Exchanger Tubes
Here you will need a power washer. This will help you to get all of the build-up and grime out of the interior of the tubes. This simple procedure is easy to do:
- Connect the end of the power washer hose to the intake of the heat exchanger and the recycle hose of your power washer to the output of the heat exchanger.
- Fill the power washer reservoir with the power washer. If you do not have a power washer that has a recycle feature, use a bucket to collect the fluid and place the feed hose of the power washer into the bucket.
- Turn on the power washer and gently squeeze the trigger.
- After several minutes change out the water with a fresh solution and repeat. Now change the water and repeat one more time.
- Lastly, change the water out with fresh water without cleaning agent and flush the tubes out fully for one full cycle.
