Silicone Rubber Heater Mat With Adhesive
Jaye industry made the silicone rubber heater mat based on customer’s specific requirements, most of the silicone rubber heater mat we make are requested by be with the 3M adhesive at the back. Silicone rubber heaters are the most complete surface heating solution made by Jaye industry for...
Stainless Steel Thick Film Heater For Kettle
Stainless steel thick film heater is a new type of heating element, which is made of advanced thick film heating technology, printing insulation layer, thick film heating resistance, conductor, insulating protective glaze and other new composite materials on stainless steel substrate by high...
2-4 Holes Magnesia Ceramic Insulating Tube For Heating Element
Jaye can make different shapes, such as round, square, rectangular and oval. We provide outer diameter from 0.3mm to 50mm for selection. The ceramic rods are widely used in many kinds of electronical devices as ceramic insulators, positioning pins, central pins, guide pin.
Thick Film Instant Hot Shower Heater
The use of thick film heating technology in the shower is more economical. In the shower, the thick film heating technology belongs to the instant heating type, which can be used immediately. Compared with the conventional tank water heater, there is no need to consider the residual hot water...
Water Dispenser Tubular Thick Film Heater
The heating element of the water dispenser tubular thick film heater adopts stainless steel thick film heating pipe, and the heating part adopts pipe design, which can make the water flow in the pipeline and heat to the required temperature just at the outlet, so as to prevent the repeated...
Magnesium Oxide Rod For Single-end Cartridge Heater
High-purity magnesium oxide rod is a product specially produced by our company for single-end electric heating tubes according to customer requirements. It has the advantages of insulation performance, voltage resistance and good heat conduction. It has been recognized by major single-end electric heating tube manufacturers in South Africa and other countries.
Thermocouple Head With Aluminum Die-casting
The basic principle of thermocouple temperature measurement is that two different material conductors form a closed loop. When there is a temperature gradient at both ends, a current will flow through the loop. At this time, there is an electromotive force between the two ends-thermal electromotive force, which This is the so-called Seebeck effect.
Thick Film Heater For Soybean Milk Machine
Thick film heaters are more and more popular used on the soybean milk machines nowadays. The insulating dielectric material can be printed on a stainless steel substrate in the form of screen printing and sintered at 850°C to make a substrate with high impedance and high strength. Its...
Stainless Steel Thermocouple Head
This is a product that is waterproof thermocouple head. The thread can be precisely welded at the pipe to ensure a waterproof seal. Jaye adopts stainless steel integrated structure, built-in high-quality chip, which make a more accurate measurement. If there are special requirements, 316 stainless steel can be used to prevent corrosion and have a longer life.
Alumina Ceramic Components
Alumina ceramics have the characteristic of low dielectric constant, low dielectric loss, high insulation strength, high volume resistivity, good bending strength, high stability, high compressive strength, and good cold and hot shock denaturation. It is widely used in thermostats, insulating parts, various thermal equipment, electric appliances, iron structure buildings,...
Steatite Ceramic Insulator With 3 Holes
Steatite ceramic parts, white color, strong acid resistance, high insulation, strong adsorption, a good device ceramic material, it is used as coil skeleton, mounting plate, bracket, various types of high-frequency insulators, ceramic switch shaft in electronic products 、porcelain bushing, resistance matrix, sealed shell, etc., talc porcelain (high frequency porcelain) has...
Slip-on Flanges For Heaters
The slip-on flat welding flange is connected to the pipe end. It mainly useds for the parts that connect the pipe to the pipe. There are holes on the flange, which can be worn through bolts to make the two flanges tightly connected, and the flanges are sealed with gaskets.
