Hot Plate High Temperature Switch
Hot Plate High-temperature switches operate in a current-independent manner, and measure the temperature by means of a thermo-bimetal snap-disc. the most popular temperature is 420-450℃. After reaching the defined temperature, the switch opens or closes the circuit of the device to be protected....
U Shape Air Finned Tubular Heater
The u shape air finned tubular heater is a finned tubular heater with U type shape for air drying. It is a kind of industrial heater using SUS304 material tubular with finned for air blowing heating, which is mostly used for air heater to clean the air matured.
Silicone Rubber Heating Element For Blood Analyzer
Silicone heating pad is composed of two glass fiber cloths and two pieces of silicone rubber glass fiber cloths. The safety of the silicone heating sheet is that the general flat heating element uses carbon as the main component, and the silicone heater is composed of aligned nickel alloy resistance wires, so it is high safety.
Silicone Heating Pads For Plants
Silicone rubber heating pads which have silicone heating wire evenly distributed to ensure uniform heating area. It has waterproof performance that is easy to clean. It is used for warming root area 10-20℉ over ambient temperature.
30 Minutes Air Fryer Timer Switch
Air fryer are more and more popular in our daily life, Compared with traditional electric fryers and traditional ovens, the comparative advantages of Air Fryer are: low fat content in food: fresh fries contain only 1.5% fat, and frozen fries contain only 5.5% fat, far lower Used in traditional...
Air Fryer Timer Switch
The air is quickly heated through the top baking device, and a time switch determines the heating time and the required temperature. The high-speed air circulation technology is currently the most advanced in the world. It uses only air for cooking, no or little oil is used, so no A lot of oil...
Ni80Cr20 Resistance Heating Alloy Wire
Jaye offers resistance wire that includs chrome alloy, Fe-Cr-Al, pure nickel and copper nickel alloy. ocr23AL5, ocr25AL5 and Ni80Cr20 are the most common use for the heating elements’ basic part. Resistance heating wire is produced by smelting, steel rolling, forging, anneraling, drawing, surface treatment, resistance control test, etc.
Nichrome Resistance Wire
Nickel chromium and iron, aluminum, silicon, carbon, sulfur and other elements can be made into alloy nickel chromium wire, which has the advantages of high temperature, high strength, strong plasticity, high resistivity and heat resistance. Nickel-chromium alloy wire is the most basic component of most electric heating elements, and is widely used in electric heaters such...
Resistance Wire For Heating
In recent years, the resistance wire mostly uses by iron-chromium aluminum alloy and nickel-chromium alloy. The maximum temperature of iron-chromium aluminum alloy has reached 1400℃. On the basis of the heating wire, electric heating rods, electric heating plates, electric heating plates and other electric heating elements have been developed for many years, but their...
Efficient Split-Sheath Cartridge Heater
Spilt sheath cartridge heaters are tubular heaters that formed in to a half circle which is then folded in the middle with the two halves now making a circle. Their claim to fame is that they are easier to remove from a hole. The two halves expanding as the heater heats up with the heater more...
High Temperature Thermal Fuse
There is a very thin metal wire inside the thermal fuse, which is the impedance component; this wire will be connected to the circuit. When the current through the circuit is too high, the temperature of the metal wire rises and melts, causing a gap between the contacts, and the circuit will be disconnected. At this time, the current will stop, thus preventing the danger of...
Mold Heating Split-Sheath Cartridge Heater
The mold heating split sheath cartridge heater are improved products of ordinary cartridge heater. It is formed by folding a semi-circular D shape electric cartridge heater in half. After its half-folding is applied, its self-expansion force closely matches the die hole. The advantages of high...
