Nov 02, 2020
How to install the different types of immersion tubular heater elements?
Immersion tubular heater elements is widely used, whether water heating, oil heating or other liquid heating, liquid heating tube is indispensable. Different use environment liquid heating tube shape is also different, its installation way is also different. So let's look at how different shapes of liquid tubular heater elements are installed.
1. Cartridge electric heater"
In the cartridge electric heating pipe heating liquid is generally threaded cartridge electric heating pipe, often used for heating water tank and so on.
The installation method of the threaded cartridge electric heating tube is as follows:
A. Drill a threaded hole in the water tank consistent with the threads of the heating tube.
B. Screw in the liquid heating tube from the outside in. (There is also cartridge threaded heating tube with thread up, mounted in the opposite direction)
2. U-type/W-type/straight bar/special-shaped electric tubular heater element:
U-shaped/W-shaped heating pipes for heating liquids are generally made with fasteners or silicone pressure heads.
A. Drill a hole slightly larger than the diameter of the pipe thread on the installation of the electric heating pipe.
B. Then pass the end with the fastener through the hole, put on the gasket or gasket, and screw on the nut.
3. Flange electric tubular heater elements:
Compared with the above several complex points, the installation mode of the flange electric heating pipe. Small series I have been systematically introduced before.
There are many ways to install the liquid heating tube, according to the above introduction you should know how to install the liquid heating tube.
