Introduction of Built-in Temperature Control Flange Heating Pipe

Introduction of Built-in Temperature Control Flange Heating Pipe

Flange heating tube is a kind of immersion heating tube, which has a wide range of applications and is suitable for heating various liquids. Built-in temperature-controlled flange heating tube is based on the flange heating tube and added an imported temperature control unit (Thermostat/thermostat), which can detect the temperature of the heating medium and realize over-temperature power-off protection to improve product energy saving Effectiveness and safety.

Built-in temperature control flange heating pipe, composed of heating pipe, temperature measuring pipe, flange, control box and lead wire. The material of the heating pipe and flange can be selected according to the properties of the liquid. The control box is easy to disassemble and assemble, which can effectively protect the thermostat and prevent accidental touch.

Not only can the material of the heating pipe and flange be customized, but also the power, voltage, flange outer diameter, immersion length, etc. can be customized. Product parameters for reference: power 10kW, voltage 3 phase 380V, immersion length 900mm. Products with this parameter can heat 10kg of water from room temperature to 100°C in 5 minutes, and we can provide calculation services.

Why do you need over-temperature protection?

Over-temperature protection can make the heating medium reach the specified temperature and cut off the power to prevent excessive temperature from affecting product performance. An over-temperature protection device is installed on the immersion heater to prevent the heating tube from burning dry without liquid, which greatly protects the heating tube product. Because the immersion heater is designed for use in a liquid environment, dry burning will cause the surface power of the product to soar, which will affect the life of the product, and the heating tube may be burned out immediately.