Nov 20, 2026
JAYE Heater Technology provides customized electric heating elements that can be evaluated as alternatives to selected Kawai Corporation heating elements. Both manufacturers offer made-to-order heating products, including silicone rubber heaters and other industrial heating element types.
However, a suitable alternative must be confirmed by comparing the original heater's construction, dimensions, voltage, wattage, operating temperature, insulation requirements, mounting method and application conditions.
A JAYE heater should not be considered a direct replacement solely because its rated voltage or power is similar to the Kawai product.
For OEM manufacturers and industrial equipment buyers sourcing an alternative to a Japanese heating element, the practical starting point is the original Kawai model number, technical drawing or product specification.
JAYE can review the requirements and assess whether a corresponding custom construction is technically feasible.
Silicone rubber heaters: Both Kawai and JAYE publish flexible silicone rubber heater products with customized dimensions and electrical specifications. Kawai's English product page lists a maximum watt density of 2.5 W/cm² and a maximum voltage of 300 V;
JAYE's published silicone heating elements catalog lists voltage options from 12 V to 600 V AC or DC and a maximum watt density of 80 W/in² (approximately 12.4 W/cm²). These are published product limits, not directly comparable operating ratings for identical designs.
Cartridge heaters: Kawai publishes cartridge heater diameters from 3.1 mm to 20 mm and lengths from 15 mm to 2200 mm.
JAYE also manufactures customized cartridge heaters with different sheath materials, diameters, lengths and lead configurations.
Tubular heaters: Both companies offer tubular heating elements for industrial heating applications.
Kawai publishes sheath diameters from 5.3 mm to 16 mm and lengths from 250 mm to 4300 mm for its listed tubular heater range.
Customized specifications: JAYE can review drawings, samples and existing heater specifications to assess manufacturing feasibility.
Final compatibility depends on the complete mechanical, electrical and thermal requirements.
Japanese-spec replacement: Japanese dimensions or voltage values alone do not establish interchangeability.
The applicable Japanese electrical requirements, insulation tests, certifications and equipment interface must be checked for the specific project.
Kawai Corporation is a Japanese manufacturer of electric heaters. Its official product portfolio covers several types of heating elements for industrial equipment and thermal management applications.
The published product range includes:
| Kawai product category | Construction or application | Relevant technical considerations |
|---|---|---|
| Silicone rubber heaters | Flexible surface heating for flat or shaped components | Heater outline, watt density, mounting and temperature control |
| Cartridge heaters | Cylindrical heaters installed in drilled holes or metal blocks | Sheath diameter, heated length, wattage and fit tolerance |
| Tubular heaters | Metal-sheathed heating elements for gases and liquids | Sheath material, geometry, watt density and heat-transfer medium |
| Pipe heaters | Removable or fitted heating structures for pipes, valves and pumps | Pipe diameter, contact, insulation and temperature distribution |
| Film heaters | Thin planar heaters using polyimide material | Thickness, chemical compatibility and siloxane-free construction |
| Tube heaters | Heating elements integrated into flexible tubes | Tube material, fluid compatibility and temperature requirements |
Kawai also publishes hose heaters and temperature-control products. Its product portfolio demonstrates that the company serves different heating structures rather than one universal heater design.
For buyers looking for an alternative, the first step is therefore to identify the exact Kawai product category.
A silicone rubber heater cannot automatically replace a pipe heater, cartridge heater or tubular heater because each design has a different heat-transfer path and installation interface.
Source: Kawai Corporation's official product portfolio [1].
Silicone rubber heaters are one of the clearest product categories for a technical comparison because both manufacturers publish product information for flexible surface heaters.
These heaters generally contain a resistance heating element between insulating layers of silicone rubber. The flexible construction allows the heater to be manufactured in different shapes and fitted to suitable flat or curved surfaces.
The following table summarizes specifications published on the manufacturers' websites and product documents.
| Specification | Kawai Corporation | JAYE Heater Technology |
|---|---|---|
| Heater type | Silicone rubber heater | Silicone rubber heating element |
| Standard construction | Flexible silicone rubber surface heater | Fiberglass-reinforced silicone rubber with wire-wound or etched-foil options |
| Published thickness | 1.1–1.8 mm | 0.056 in standard in the published catalog, approximately 1.42 mm |
| Published dimensions | 15 × 15 mm to 900 mm × unlimited length | 1–78 in length and 1–36 in width in the published catalog |
| Published operating temperature | -70°C to 220°C on the English product page | Maximum temperature listed as 260°C in the published catalog |
| Maximum watt density | 2.5 W/cm² | 80 W/in², approximately 12.4 W/cm² |
| Voltage | Up to 300 V | 12–600 V AC or DC |
| Wattage tolerance | ±10% | +5% / -10% in the published catalog |
| Heating element options | Product-specific construction | Wire-wound or etched foil |
| Mounting options | Adhesive, clamping and other specified methods | Pressure-sensitive adhesive, silicone cement and mechanical fasteners |
Important specification note: These values are taken from the manufacturers' published product information. They do not represent a controlled test of two identical heater designs.
Kawai's English page lists a maximum operating temperature of 220°C.
Its Japanese technical page provides additional temperature limits according to mounting method, including different values for standard and heat-resistant constructions. JAYE's published catalog lists a maximum temperature of 260°C.
These figures should not be interpreted as equivalent continuous operating temperatures under the same installation conditions.
Likewise, the maximum watt density values are not interchangeable performance ratings.
Actual permissible watt density depends on the heater construction, mounting method, contact surface, thermal insulation and heat dissipation.
Sources: Kawai silicone rubber heater specifications [2][3]; JAYE silicone heating elements catalog [4].
The heater's internal construction and attachment method influence how it transfers heat to the target component.
Kawai describes silicone rubber heaters that can be manufactured with holes, notches and different shapes.
Its Japanese technical documentation also describes glass-fiber-reinforced silicone rubber construction and multiple mounting methods, including clamping, adhesive bonding and mechanical fastening.
JAYE's published catalog identifies wire-wound and etched-foil heating elements, with mounting options such as pressure-sensitive adhesive, silicone contact cement and mechanical fasteners.
For a replacement project, engineers should check:
A heater with the same external dimensions may still have a different heat distribution if its internal heating pattern or mounting contact differs.

The appropriate JAYE product depends on the original Kawai heater type and its application.
This is a potential product-category match for equipment requiring flexible surface heating.
JAYE manufactures silicone rubber heaters in customized shapes and electrical specifications. Depending on the design, the heating element can use resistance wire or etched foil, with options for adhesive mounting, mechanical fastening and temperature-control components.
Typical information required for evaluation includes:
Relevant product: JAYE Silicone Rubber Heater
Kawai's cartridge heaters are designed for installation in suitable holes or metal blocks. Their construction uses a resistance heating coil, insulation material and a metal sheath.
JAYE also manufactures customized cartridge heaters with stainless steel or Incoloy sheath options, different diameters and lengths, and customized lead configurations.
For a potential replacement, the following dimensions are especially important:
A cartridge heater with a different outside diameter may not fit the existing installation hole. Even a heater with matching dimensions requires electrical and thermal verification before use.
Relevant product: JAYE Customized Cartridge Heaters
Tubular heaters are used in applications involving air, liquids and other heating media. Their metal sheath, resistance wire and magnesium oxide insulation form a different structure from a flexible surface heater.
JAYE manufactures customized tubular heating elements in different shapes, dimensions and materials. The design can be evaluated according to the required heating medium and installation structure.
The main replacement considerations include:
Relevant product: JAYE Industrial Tubular Heaters

The term "Japanese-spec equivalent" should be understood as a specification-matching requirement, not as an automatic product classification.
For industrial heating elements, a Japanese-origin product may use metric dimensions, particular electrical ratings, specified insulation tests or customer-specific construction details. However, these requirements vary by product and equipment manufacturer.
A replacement heater should be evaluated across five technical areas.
The replacement must fit the existing installation space and mounting structure.
For silicone rubber heaters, this includes the outline, thickness, holes, cutouts and mounting arrangement. For cartridge heaters, the outside diameter and insertion length are critical. For tubular heaters, the sheath geometry and connection positions must be checked.
The replacement should provide an appropriate heating output for the actual application.
Engineers should confirm:
A heater with a higher maximum watt density is not automatically a suitable replacement.
Excessive local heat flux can cause overheating if the target surface cannot dissipate the generated heat.
Insulation resistance and dielectric withstand requirements should be compared using the same test voltage, test duration and test conditions.
For example, Kawai's English silicone rubber heater page lists insulation resistance of more than 1000 MΩ at 500 V DC under no-heat conditions, and a dielectric test of 1500 V for 1 minute or 1800 V for 1 second with a 5 mA limit.
JAYE's published catalog provides its own electrical and construction information.
The specific JAYE design should be checked against the original equipment requirement rather than assuming the test values are identical.
Where the application requires UL, CE or other regulatory compliance, the exact product construction and certification scope must be verified separately.
A heating element is only one part of a temperature-control system.
If the original Kawai heater includes a thermocouple, thermostat, RTD or thermal fuse, the replacement design should be reviewed for the same functional requirements.
The sensor type, position, control method and independent overtemperature protection should be considered according to the equipment's control architecture.
A JAYE alternative may be worth evaluating in the following situations:
These situations require different levels of engineering verification.
A replacement for an existing machine may need closer dimensional and electrical matching, while a new OEM project may allow more flexibility in the heater structure.
Before requesting a quotation, buyers should prepare as much of the following information as possible.
| Information | Why it matters |
|---|---|
| Original Kawai model number | Identifies the existing product category and configuration |
| Technical drawing or sample | Establishes the mechanical dimensions and construction |
| Rated voltage | Confirms electrical compatibility |
| Rated wattage or resistance | Defines the electrical heating output |
| Operating temperature | Establishes the thermal design requirements |
| Heated material or medium | Determines the heat-transfer conditions |
| Mounting method | Affects contact, heat loss and mechanical retention |
| Lead wire and terminal details | Ensures electrical connection compatibility |
| Sensor and protection requirements | Defines temperature monitoring and safety functions |
| Quantity and annual demand | Supports manufacturing and quotation evaluation |
If the original model number is unavailable, clear photographs of the heater, its nameplate, wiring and installation position can help establish the initial product category.
A dimensioned drawing or physical sample is preferable for detailed evaluation.
1.Can JAYE directly replace a Kawai heating element?
Not without checking the original specifications. JAYE can evaluate a custom heating element based on the Kawai model number, drawing or sample. Direct replacement depends on dimensional, electrical, thermal, insulation and installation compatibility.
2.Are JAYE silicone rubber heaters equivalent to Kawai silicone rubber heaters?
They belong to the same general product category, but this does not mean that every model is equivalent. Kawai and JAYE publish different product specifications and construction options. The selected heater must be compared against the actual application requirements.
3.What is the maximum operating temperature of Kawai silicone rubber heaters?
Kawai's English product page lists an operating temperature range of -70°C to 220°C. Its Japanese technical page provides additional limits based on construction and mounting method. The applicable temperature must therefore be confirmed for the selected heater configuration.
4.What is the maximum watt density of Kawai and JAYE silicone rubber heaters?
Kawai's English product page lists a maximum of 2.5 W/cm². JAYE's published silicone heating elements catalog lists up to 80 W/in², approximately 12.4 W/cm². These are manufacturer-published limits and should not be treated as directly comparable working ratings. Mounting conditions, heat dissipation and heater construction affect the permissible watt density.
5.Can JAYE manufacture a heater according to a Japanese drawing?
JAYE can review drawings using metric dimensions and specified electrical requirements to assess manufacturing feasibility. The drawing should include the heater outline, dimensions, voltage, wattage, material, lead configuration and relevant testing requirements. Any unclear or unavailable specification should be confirmed before production.
6.Does a JAYE alternative automatically have the same certification as the original Kawai heater?
No. Product certification is construction- and model-specific. If the original equipment requires UL, CE or another approval, the exact JAYE product and its applicable certification documents must be checked independently.
[1] Kawai Corporation – Official Product Portfolio:https://www.kawaidenki.co.jp/english/products/
[2] Kawai Corporation – Silicone Rubber Heaters:https://www.kawaidenki.co.jp/english/products/silicone_rubber_heaters.html
[3] Kawai Corporation – Silicone Rubber Heater Specifications and Technical Information (Japanese):https://www.kawaidenki.co.jp/product/silicon.html
[4] JAYE Heater Technology – Silicone Heating Elements Catalog
[5] JAYE Heater Technology – Silicone Rubber Heater
[6] Kawai Corporation – Cartridge Heaters:https://www.kawaidenki.co.jp/english/products/cartridge_heaters.htm
[7] Kawai Corporation – Tubular Heaters:https://www.kawaidenki.co.jp/english/products/tubular_heaters.html
[8] JAYE Heater Technology – Customized Cartridge Heaters
[9] JAYE Heater Technology – Industrial Tubular Heaters

If you are evaluating a JAYE alternative to a Kawai heating element, the original model number, technical drawing or physical sample can be used as the starting point.
Previous: No Information
Next: Silicone Rubber Heaters for Waste Shredders: DC Motor, Oil Pump and Lubrication Line Heating