Jul 19, 2021
KSD Thermostat Test Method
The KSD thermostat produced by Jaye Heater is a bimetallic disc instantaneous temperature controller with a fixed temperature. It is connected to the grounded metal part of the equipment through the metal cover of the thermostat, and its appearance requires good processing. There should be no defects such as cracks, deformation, burrs, stains, etc.
KSD thermostat test method:
1. Clamp the thermostat in the test area and wait for the temperature in the temperature test area to balance before starting the test.
2. Air is used as the heating medium in the test furnace, and a thermometer or temperature sensor is placed in the temperature measurement area.
3. Starting at 2K before the temperature enters the operating temperature tolerance range, heating or cooling is performed at a temperature change rate of less than 1K/min, during which stirring must be carried out to make the temperature distribution fully uniform; the uniformity of the temperature distribution in the temperature measurement zone is ±0.4K Within.
