How to install the infrared quartz heater in the water tank?

How to install the infrared quartz heater in the water tank?

Customers often experience dry burning when using the infrared quartz heater in the water tank, resulting in the scrapping of the infrared quartz heater.

So how do we avoid the phenomenon of dry burning of the infrared quartz heater in the water tank, which involves a problem, that is, the installation position of the infrared quartz heater in the water tank.

So how is the infrared quartz heater installed? Let's take a brief look at it:

1.Install vertically from top to bottom

In this installation method, we should pay attention to the minimum liquid level of the water tank.

For example, if the height of the water tank is 2 meters, and the minimum liquid level is 1.6 meters, then the infrared quartz heater should reserve a non-heating area of 0.4 meters, otherwise there will be dry burning.

2. Drill holes from the side of the water tank to install

This installation method is recommended by us, because it can set the length according to the power, without reserving the cold area, thus saving the cost.

Because it is all immersed in the liquid, there will be no dry burning phenomenon, and the service life of the infrared quartz heater is guaranteed. It can be seen that the side drilling installation is the best installation position for the infrared quartz heater of the water tank.

After reading the above content, we know that the best installation position for the infrared quartz heater of the water tank is to install the hole on the side, because this installation method not only saves the cost, but also ensures the service life of the infrared quartz heater.