How to maintain the resistance cartridge heater?

How to maintain the resistance cartridge heater?

We know that all products need maintenance to extend their service life and work efficiency, so the sthe resistance cartridge heater we use is no exception. Here are some suggestions for maintenance.

1. Store  the resistance cartridge heater in a dry place, especially in a high humidity environment.

2.Protect the lead of the heating tube to avoid abrasion, and do not expose it to contaminants such as grease and the water outlet of the injection molding machine. The use environment of the wire shall not be higher than 450 degrees Celsius.

3.The operation of the equipment needs to have temperature control and maintain good working conditions, and the operating equipment must comply with the specifications.

4.Because all heating pipes have a tendency to absorb moisture in humid air, they may accumulate moisture during transportation or storage. So if the heating tube with low insulation resistance value (less than 1 megohm) can be placed in the oven for several hours to bake or use a low voltage at the beginning of operation to eliminate moisture.