Mar 10, 2021
Removal And Assembly Instructions For Mug Heaters
When disassembling the mug heater, firstly check the installation and wiring of the original mug heater before disassembling, and record it in detail. During the installation, follow the original appearance and order the wire of the mug heaterand the power supply when removed. Connect the wire, connect the baking coaster with silica gel (glass glue) and the yellow rubber of the baking cup machine, fix it, and ensure it is firm, keep it ventilated and dry, wait 1-2 days, and the silica gel can be used after it dries. When installing the bakeware mat, the wiring has been made, just fix the bakeware mat with silica gel and iron mat.
Note: When the new heater and pan pads are used after installation, there may be smoke. At this time, just raise the temperature of the cup machine and the tray machine slowly (that is, first heat up to 100 degrees, turn off, then turn on again, and heat up to 100 degrees, Then turn it off, turn it on again, and heat up to 200 degrees), and the porcelain cup can be baked several times. After a period of time, the smoke will disappear. Special reminder: The operation of the cup machine must be strictly in accordance with the instructions, otherwise it is easy to cause damage to the equipment (mug heater)!
