Coil hot runner heater is a kind of heating element specially designed for hot runner system, and is used in high temperature heating of injection parts in plastic industry. It is made of closed stainless steel material, which can effectively prevent leakage and damage. It is...
Hot runner heating tube is made of high-quality stainless steel material and strict process technology. Hot runner coil heater heating tube has round, square and flat sections. There are 2 options for outer surface: bright and sandblasted. Also, it can be made with J type or...
Spring coil heater for hot runner are mainly used in the hot runner heating system as one of the most improtance heating elements in the equipments, the spring coil heater made by Jaye industry adapt high quality nickel chrome resistance wire placed inside chrome nickel steel...
Air condition finned strip (tubular) heater made by Jaye industry is constructed like basic tubular elements with the addition of continuous spiral fins, 4-5 per inch permanently furnace brazed to the sheath. Fins greatly increase surface area and permit faster heat transfer...
Finned tubular heater are safer to operate than open coil heaters as the risk of fire from combustible particles in the flow stream and electrical shock is minimized. Increased service life and less maintenance required due to the rugged finned element construction. Power...
Finned heaters are constructed using tubular element as the basis of construction. Fin material is continuously spiral wound tightly onto the element surface to increase the convective surface area for air and non-corrosive gas heating. Fin spacing and size have been tested...
The heating equipment finned tubular heater can be installed in blower ducts or other stationary, flowing air heating places. It is made by high-quality stainless steel, modified magnesium oxide powder, high-resistance electric heating alloy wire, stainless steel heat sink...
The finned heater is mainly made of metal tube (iron/ stainless steel) as the shell, magnesium oxide powder for the insulation and heat-conducting as the filler, and the electric heating wire is used as the heating element. With our advanced production equipment and process...
The Air duct finned tubular heating elements made by Jaye Industry own the features of Fast heating, uniform heating, good heat dissipation performance, long service life, small size for device, low cost, high thermal efficiency, etc.
Stainless steel Flange immersion heater is the immersion tubular heating element installed with the Stainless steel thread flange or flat flange which is normally used for swimming pools, electric water boilers, solar energy systems, solar water tanks, chemical pools, baths, etc.
Finned Tubular Heaters are manufactured by Jaye Industry with the same rugged and strong construction as our standard Tubular Heaters and then a helically or spiral wound fin is attached to the outer sheath.The fins are fully brazed to the heater sheath for optimum heat...
Brass Flange immersion heater is the immersion tubular heating element installed with the brass flange which is also a kind of Screw plug heater, normally used for swimming pools, electric water boilers, solar energy systems, solar water tanks, chemical pools, baths, etc.
