Flange immersion tubular heater made by Jaye is a type of heating element that is designed to be immersed in water tanks to heat the water. The flange is bolted to the tank and provides a secure mounting point for the heater.Flange Immersion Tubular Heater For Water Tank is...
There are two options for the fin shape. Winding fins and square fins. To equip with the fin on the tube, the role of fins is to increase the heat dissipation area of the tube, to increase the contact surface with air and can improve the heat exchange efficiency comparing...
Finned type tubular heater is mainly working in a dry burning operating environment, which divided into two finned shape. Compared with the normal heating element, due to the fins, it enlarges the radiating area and decreases the heat loss.
The air heater is also called a pipeline heater. The pipeline air heater is mainly composed of an U shaped electric heating tube, an inner tube, an insulation layer, an outer shell, a wiring cavity, and an electronic control system. Its working principle is: cold air enters...
The melt-blown heater for the production of masks is made of stainless steel as the heater shell, and is equipped with a amount of stainless steel heating pipes. After the heating pipes are energized, the tubes heat up and heat up, and exchange heat with the air flow sent by...
Melt-blown cloth is a high-speed hot air flow to draw a thin stream of polymer melt extruded from the die orifice, thereby forming ultra-fine fibers and collecting them on the condensed screen or roller, while bonding themselves to become Meltblown nonwoven fabric. The...
Air Heater For Mask Making Equipment is an electric heating device which is used to heat gas in a tubular heat preservation vessel and a heating tube. Non-woven cloth heater has the characteristics of fast heating speed, good heat preservation performance and high heating...
The industrial circulation heaters that Jaye Industry designed are for the currently Rangely demanded meltblown fabric machine.It is The industrial circulation heaters that Jaye Industry designed are for the currently Rangely demanded meltblown fabric machine, which is making...
Melt-blown non-woven equipment is a machine that can heat the airflow from the initial temperature to the set temperature, the temperature can reach 850℃. Jaye Industry provides this types of heaters, and use high-quality 304 stainless steel as the casing of the electric...
The production process of the melt-blown non-woven fabric is that the compressed air output by the air compressor passes through the dehumidification and filtration and enters the electric air heater. After heating to the set process temperature, it is transmitted to the...
Melt blown cloth heaters are also known as pipe air heaters, pipe electric heaters, According to the shape, it can be divided into horizontal pipeline heater and vertical pipeline heater; it is mainly used to heat the airflow from the initial temperature to the set...
Melt-blown non-woven heat exchanger is an electric heating device that mainly heats the gas flow. It is commonly called an atmospheric heater and a gas heater. It has multiple baffles in its inner cavity. In order to guide the flow of gas and extend the residence time of the...
