The special heating tube should read the instructions carefully before installation and application to prevent damage. The hot part of the single-ended heating tube penetrates into the heating material, and the heating value of the heating tube must not gradually exceed the allowable heating...

The tubular electric heating element (metal heating tube) has been used for a long time and has achieved good results in the following departments and equipment applications. 1. Used to dry wood, paper, printing and dyeing, paint, etc., with finned heating tubes, etc. 2. For the melting and...

Introduction Of Various Temperature Sensors There are hundreds of temperature sensors. Today we divide them into two categories, one is contact temperature sensors and the other is non-contact temperature sensors. The characteristics of the contact temperature sensor: The sensor directly...

Introduction: One is to grouting the alloy wire, which can be radiated to heat the ceramics. Generally speaking, it can be heated from a long distance. The other is to pierce the alloy wire in a small ceramic square, and wrap the outside with a stainless steel shell. It is widely used in plastic...

The heating tube is wrapped with metal fins to increase the heat dissipation area by 2 to 3 times, so that the surface power load of the finned electric heater is 3 to 4 times that of the non-electric heater. As the length of the electric heater is shortened, its own heat loss is reduced. Under...

It is generally made of iron chromium aluminum, nickel chromium, nickel chromium iron and other raw materials, and has a certain resistance value. One is the electric floor heating type including high temperature electric heating floor heating sheet, low temperature electric heating floor...

1. Do not let the leads hang loosely. Ensure that the lead wire is installed in a fixed position to prevent the flexible film heater heater from breaking when the lead wire is pulled. 2. Do not immerse the flexible film heater heater in liquid or expose the heater to steam and corrosive gas. 3....

The electric heating tube has the advantages of simple structure, low cost, high thermal efficiency, energy saving, safe use, light weight, easy disassembly and assembly, and a wide range of uses. Metal tubular electric heating tubes have been widely used in various industries after long-term...

Infrared has a typical thermal effect and can be heated by infrared rays. It has made an important contribution to the heating industry in the drying industry. It has sensitive response, compact structure, light weight, small size and high work efficiency. According to the wavelength range of...

Electric heating tubes for water heating can also be divided into large electric heating tubes for boiler applications and small electric heating tubes made by individuals according to their application. In order to prevent rust, many electric heating tubes have adopted a lot of chemical...

1. The cast aluminum heater should first check whether the power supply voltage at the application site is consistent with the additional voltage of the product. If it is different, it should be equipped with the same power supply voltage as the additional voltage of the product. 2. To ensure...

During the kneading and cutting of the tube shell, end cap, tube core and liquid-filled tube, these parts of the cast aluminum heater will inevitably be contaminated. For example, when rubbing the inner groove tube, the lubricant stays in the tube, and it is also contaminated by oil and other...

1. The difference between carbon fiber heating tube and PTC heater raw materials The carbon fiber heating element is a pure black body material, and the heating element base material is carbon fiber felt and carbon fiber filament, so it has the characteristics of rapid heating, small thermal...

The heating wire itself is a metal conductor, and will emit heat and provide heat energy after being energized. Mainly used in metallurgical machinery, medical treatment, chemical industry, ceramics, electronics, electrical appliances, glass and other industrial heating equipment and civil...

The corrosion resistance of stainless steel heating tubes is not certain, but relative and standard. At this stage, there is no steel grade that does not rust in all natural environments, whether in China or overseas. Stainless steel plate heating pipes are also unlikely to be usable in all...

The flange heating tube is made of high-temperature stainless steel seamless tubes evenly distributed, composed of high-temperature resistance wires, densely filled with crystalline magnesium oxide powder with good thermal conductivity. The structure is not only scientific, but also has high...

1. The stainless steel electric heating tube is small in size and high in power: the electric heater mainly uses clustered tubular heating elements inside, and each clustered tubular heating element has a high power of 5000KW. 2. Fast thermal response, high temperature control accuracy, and high...

What is the difference between the rated voltage and the working voltage? 1. Rated voltage The rated voltage refers to the voltage connected to the electric heating tube specified in the design and marked on the shell of the tube. Or in other words, the rated voltage is the voltage given by the...

Tubular electric heating elements are made of metal tubes (including stainless steel and copper tubes), and spiral electric heating alloy wires (nickel-chromium, iron-chromium alloy) are filled with compacted magnesia sand along the central axis of the pipeline, which has good insulation and...

Finned tube radiator is a kind of heat exchange equipment. The water heater uses wall-hung boilers or boilers to heat the circulating water, and then connects to the finned tube radiator through pipes, and then outputs the appropriate temperature through the finned tube radiator to form an...