How to Use Ceramic Bobbin Radiant Tube Heater?

Oct 01, 2023

 

2-5KW-Ceramic-Bobbin-Rdiant-Tube-Heater 1

Ceramic bobbin radiant tube heaters are commonly used for space heating in commercial and industrial applications. These heaters consist of a ceramic element enclosed in a protective tube. They emit infrared radiation to heat objects and surfaces in their proximity.

Here are general steps to use a ceramic bobbin radiant tube heater.

 

Safety Precautions

1. Read the Manual: Always start by reading the manufacturer's user manual and safety instructions that come with the heater.

 

2. Inspect the Heater: Check the heater for any visible damage or defects. If you notice any issues, do not use the heater, and contact the manufacturer or a qualified technician for inspection and repairs.

oven-ceramic-bobbin-heaters-radiant

Installation

1. Location: Choose a suitable location to install the ceramic bobbin radiant tube heater. It should be placed at a height that provides effective heating coverage while avoiding obstacles.

 

2. Mounting: Securely mount the heater according to the manufacturer's instructions. Ensure it is level and properly attached to the support structure.

 

3. Gas Connection: If the heater is gas-powered, connect it to the gas supply using the appropriate fittings and hoses. Ensure that all connections are tight and leak-free. It's essential to follow local gas safety regulations and hire a qualified technician for gas connections.

20kw-high-oven-ceramic-bobbin-heaters-radiant 1

Powering On the Heater

1. Gas Supply: If it's a gas-powered heater, ensure the gas supply is turned on, and the pilot light is lit, following the manufacturer's instructions.

 

2. Electric Supply: If it's an electric radiant tube heater, plug it into a suitable electrical outlet with the correct voltage and current rating. Ensure the power source is turned on.

20kw-high-oven-ceramic-bobbin-heaters-radiant 4

Operating the Heater

1. Thermostat: If your heater has a thermostat, set it to the desired temperature. This allows you to maintain a consistent level of heat. Follow the manufacturer's guidelines for thermostat settings.

 

2. Manual Control: Some heaters have manual control settings that allow you to adjust the heat output. Consult the user manual for specific instructions on using these controls.

 

3. Ventilation: Ensure there is adequate ventilation in the area where the heater is installed. Proper ventilation helps prevent the buildup of combustion byproducts in the case of gas heaters and ensures efficient combustion.

20kw-high-oven-ceramic-bobbin-heaters-radiant 2

Maintenance

1. Cleaning: Periodically clean the heater's reflector and ceramic elements to remove dust and debris, which can reduce its heating efficiency.

 

2. Inspection: Inspect the heater regularly for signs of wear, damage, or corrosion. Replace any worn-out or damaged components as needed.

 

3. Annual Servicing: Consider scheduling annual servicing by a qualified technician to check for gas leaks (if applicable), clean internal components, and ensure safe operation.

 

4. Safety Checks: Always prioritize safety. If you notice any unusual smells, noises, or signs of malfunction, turn off the heater immediately and contact a technician for inspection and repairs.

Related Products

Category

Product Recommended

  • Silicone Heating Strips in Refrigeration Compressor Systems
  • Adjustable Electric Iron Kst Thermostat
  • Cut Off Fuse
  • High Density Cartridge Heater
  • Silicone Rubber Heater Mat With Adhesive
  • Oven Timer Switch For Cooking Appliance

Share